Brother Mfc 7840W Drum End Soon

When The Lcd Shows Accepted, Close The Front Cover.

How to reset brother drum counter: When scanning a document to be copied or. The message drum end soon indicates the drum unit will need to be replaced soon.

If The Message Continues To Appear, The Drum Unit Should Be Replaced With A New Dr360.

Brother strongly recommends that customers use only genuine brother drum units and/or toner cartridges. However, it is a good idea to have a new drum unit. Do i have to fix something.

Press 1 To Reset The Drum Counter.;

Page yield is based on an average of 5% page coverage. To confirm you are installing a new drum, press the up arrow key. You can replace the drum unit when you feel the print quality is no longer acceptable or when the message replace drum is displayed.

If You Replaced The Drum Unit And The Message Continues To Appear On The Display, Verify The Drum Counter Was Reset:

[example 1] the case to put the toner cartridge into the drum unit for monochrome laser model. Crisp, sharp text and greater permanence; If the lcd displays the message 'drum end soon the drum unit is near the end of its life and it is time to buy a new one.

I Only Use It As A Photocopier & Not As A Scanner Or Fax.

Even when the lcd or the status monitor displays the message drum end soon, you can still continue to print.you can replace the drum unit when you feel the print quality is no longer acceptable or when the message replace drum is displayed. However, it is a good idea to have a new. Press the up arrow key to reset the drum counter.;