Echo Chainsaw Oiler Not Working. Saw is a new echo cs400 that has about ten hours of flawless use to this point. As the chain moves across the bar, it distributes the oil across the surface, reducing the friction and the heat that occurs when cutting.
Repair Problem Echo Chainsaw Oiler Not Working from repair-problem.blogspot.com
Next, check the oil pump by unscrewing the clutch assembly over it. At our store you will find whatever is needed to complete a safe, timely and cost efficient maintenance of your equipment and lawn yard. Used tygon that i had preformed a bell end on, so as to work onto the nipple easier.
Put Nylon Ropes On The Spark Plug's Hole So That The Piston Won't Move.
How to recognize a worn chainsaw bar. Echo chainsaws are focused on its engine that provides a long durable time if you add a little maintenance time to time. En español live chat online.
Start Date Oct 7, 2018;
Once you spot the oil pump, slide it out gently to disassemble every part. (saw had a new chain at the start of the day, hand filed after second tank of gas.) i had filled gas tank and bar oil tank about 10 minutes before problem. The hole did not line up with the slot.
If It's Working Right, There Should Be Tiny Oil Drops As The Chain Spins.
We only supply oem replacement parts that will keep your outdoor power equipment running as new. So after working on the saw for a while i found that 1 of the 2 bolts that hold the bar, chain and their cover on had worked itself out from the power head far enough to damage that thin grey plate that sits between the bar and cover to protect the oil line, that plate was causing the oil to not get to the bar the way it's designed to. Turn the screw clockwise to increase oil flow or counterclockwise to decrease the oil flow.
To Fix This, Remove The Chain And Bar From Your Chainsaw And Clean The Oil Hole And Oil Outlet Port.
This is not that uncommon. The engine is in excellent used condition, but it seems there is something wrong with the oiler. The most common reason a chainsaw oiler stops working is that the oil hole gets clogged.
At That Point, You Will Turn Off The Chainsaw And Let The Chain Brake Go.
Disconnect the spark plug boot from the spark plug, and pull the spark plug from its hole. With a 116.3 cc engine, an adjustable automatic oiler, a 36 inch bar and a weight of 23.3 lbs, chainsaw experience is required to operate it safely. As the chain moves across the bar, it distributes the oil across the surface, reducing the friction and the heat that occurs when cutting.
