Myers Hydro Pneumatic Pump Tank. Large hydropneumatic tanks are usually horizontal and 2000 gallons or more. Values are averages and do not include higher or lower extremes.
The company was sold to the mcneil machine & engineering company in 1960. The allowable cycle of the booster pump is 10 minutes and the minimum and maximum operating pressures are 30 psi (207 kpa) and 60 psi (414 kpa). Tanks can range between 10 and 72 in diameter.
You may have to cut the pvc pipe to the left of your tank. I was wondering what could be the problem with my myers hydropneumatic pump tank it's about 5 years old and when i tun on the water from the faucet the pump is not kicking on and my water is very cloudy.the psi is about 40 on the gage.my well is about 600 feet deep what could cause this problem this just happen last night.i checked all the breakers and there fine. Myers 1 hp, 115/230 volts.
No waterlogging of the tank can occur as the air is held between the tank wall and the outside of a bladder placed inside the tank, while the system water is contained inside the bladder. Tanks can range between 10 and 72 in diameter. Users who are viewing this thread.
Pro source tanks can be connected together to increase the supply of usable water (drawdown). We deliver the finest equipment to the dairy industry, food, chemical, and pharmaceutical industry. Start date oct 30, 2012;
Hydropneumatic tank size is designed based on the following information. Pneumatic motor is standard up to 36. In 1986, it was acquired by pentair, inc.
This cushion decreases as water absorbs air and the tank loses its ability to pressurize the system. Hydropneumatic tanks work best with an air cushion of ¼ to ½ the tank capacity. The allowable cycle of the booster pump is 10 minutes and the minimum and maximum operating pressures are 30 psi (207 kpa) and 60 psi (414 kpa).