Nissan Sentra Tail Lights Not Working. Tail lights not working nissan 300zx technical discussion forum. Check your sentra’s brake light switch ok, now we’ve confirmed that there is power going to the brake light circuit,.
There is a fuse box by the battery which has tail light fuse in it. Owner states that there is no cover in the trunk area where tail lights are. Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are.
I assumed the trailer was the culprit bad ground, bulb etc. The lid of the fuse box is showing location of fuse. On the fuse diagram, find the number of the fuse you want to check.
Hi gurus, i had a bolt break in the alternator and had to have it drilled out. First thing to do is check the fuse. Since you have brake lights, it's not the ground.
If nothing obvious then need to start checking power and ground on that circuit. Do the front marker lights and dash lights work if so the light switch is working. As a result, you will have your brake lights working, and your tail lights not working.
If that fails then you won't get power to the tails. They disconnected the battery to do the repair. As far as your interior light.
Tail lights not working nissan 300zx technical discussion forum. When installing my towing package i had to purchase a pig tail from nissan to plug into one of the relays (total of three iirc) located behind this kick panel. It's either a light green or white block attached to the back under the paneling.