Troy Bilt Weed Wacker Wont Start. If not, the bulb may be damaged. The carburetor might be clogged.
It was given to me and it started using the “electric start hand held attachment (and ran fine). If it bogs down, won't start and runs like garbage, this is your video! Before mixing together a new batch, check all of the components:
If your gas weed eater is not starting, the most common causes are: Pull on the starter rope and look for a blue spark. Depending on what is preventing your weed eater from working correctly, troubleshooting is a fairly simple process.
It's current on tune up, with new air filter and New videos weekly @ 1bettybill If you don’t see a spark or it’s yellow.
Contest will end at 11:01pm cst on july 19th, 2013 when i will draw a winner at random using the rafflecopter random selector. You are needed to press the primer button repeatedly several times (ideally 10) and see whether the bulb is getting filled by the liquid. The tank, the fuel lines, and the fuel filter.
There is no air filter. Insufficient, dirty or improperly mixed fuel. Getting it apart to replace the washers is another.
Pull the starter rope several times until the engine starts. Fresh gas, new spark plug. Put the trimmer on the ground brace the shaft with your foot and hold the tip of the plug about a half inch away from a metal spot on the engine block that runs into the ground.